Snowboarding is a thrilling winter sport that has gained immense popularity among adrenaline seekers and winter sports fans. The key to a seamless and enjoyable snowboarding experience lies in properly maintaining your snowboard. One of the most critical aspects of snowboard maintenance is waxing. Waxing your snowboard helps keep the base hydrated, protected from harsh winter conditions, and gliding smoothly down the slopes while preventing any damage.
Waxing your snowboard is not a complex task. With the right wax, you can easily wax your board and keep it in top condition. The right snowboard wax comes in different temperature variations to match various weather conditions and is made of various paraffin and other substances. The process of waxing involves cleaning the base of the snowboard, applying an even layer of wax, and smoothing it out with a wax iron. By following these simple steps, you can ensure your snowboard stays in good condition and ready for your next snowboarding adventure.
Do You Really Need to Know How to Wax a Snowboard?
If you’re a passionate snowboarder, you may be wondering if waxing your board is truly necessary. Some may view it as an unnecessary task, but nothing could be further from the truth.
Waxing your snowboard is crucial for several reasons. Firstly, without a freshly waxed board, it can be difficult to glide smoothly on the snow. This can result in getting stuck frequently, making your snowboarding experience less enjoyable. If you’re into competitive snowboarding, not having a freshly waxed board can also hurt your chances of winning.
Not only will waxing improve your snowboarding experience, but it also helps in protecting your snowboard. Snowboards are prone to drying out, which can lead to cracking and other problems if not prevented. Regular waxing hydrates and strengthens the board, helping it last longer.
Finally, waxing helps in speeding up your snowboarding experience. Who doesn’t love the feeling of flying down the slopes at high speed? To make this happen, waxing your board is of utmost importance.
It All Starts with a Waxing Iron
So, now that you understand the importance of waxing your snowboard, it’s time to learn how to do it.
You’ll want to start with a waxing iron. This can be any iron that you have on hand. Some people will tell you that you have to drop big bucks on a specialty iron, but this is not the case.
Just make sure that the iron you choose is not one you plan to or need to use on your clothes. You won’t be able to use the iron for ironing clothes once it has been used for wax, so keep that in mind.
Take Off Your Board’s Bindings
Once you’ve got a waxing iron that you can use, it’s time to get down to business.
You’ll want to start by removing or at least loosening the bindings off your board. If you don’t do this, you can end up warping and potentially ruining your base by exposing it to heat.
So, with a screwdriver, carefully remove the bindings. If you’d rather not take them all the way off, then at least loosen them to the point that you don’t have tension in your screws.
Once the bindings are properly removed or loosened, you’re ready to progress to the next step.
Start Dripping the Wax Onto the Board Edge
After removing the bindings, you are ready to heat your iron and then press the wax from the iron onto the snowboard.
You can drip a line of wax to the edge closest to you to get started. The wax line should go over the entire length of the board. Make sure that the iron is hot while you do this, but don’t allow it to get so hot that the wax smokes when it hits the board, as this can potentially be damaging to the board.
Once you have your line of wax, press the iron onto the snowboard and go over the drip line a few times, spreading the wax around as much as possible as you work. When you’re done, you can repeat these instructions on the other edge and then in the center of the board, working until the whole surface has been thoroughly waxed.
Let the Wax Seep into the Board
Once you are done with the actual waxing, it’s time to let the wax sit and seep into the board. For best results, try and let the wax sit for at least thirty minutes. It’s even better if you can let it sit overnight, but a half hour will work in a pinch.
After the waiting period is over, carefully scrape the wax, and you’re ready to go.
If you follow these helpful tips, you will get the job done right every time. As you can see, learning how to wax your snowboard isn’t difficult.
By following these simple steps, you’ll have a well-waxed snowboard that’s ready to glide on the snow. Regular waxing is essential for board upkeep and maintenance and is an essential aspect of the snowboarding experience.
Featured Image via Pixabay